Installation
Choose a Location.
The Magellan RoadMate receiver needs a clear
view of the sky to receive signals from the GPS satellites so choose a
location with an unobstructed view of the sky, commonly on or near the
windshield.
Clean the Surface.
Clean the area on the windshield and allow the
surface to dry before attaching the mount.
Install the Car Cradle.
Attach the USB connector to
the cradle as shown. Hold
the cradle assembly firmly
against the window surface
and push lever towards the
base.
Attach the Receiver.
Connect Power.
It is recommended that you connect the Magellan
RoadMate using the vehicle power cable before using it for the first time.
The internal battery will begin charging as soon as power is supplied to
the Magellan RoadMate receiver through the vehicle power cable.
(When the light on the vehicle power cable illuminates, it is properly
connected to vehicle power. Note some vehicles require that the ignition
be on before power is delivered to the power receptacle.)
605-0323-001 B detail.fm Page 7 Wednesday, March 17, 2010 2:35 PM
