MISUMI DS102MS, Руководство по эксплуатации

Страница: 88 / 166

88
4.1.3.3 Absolute value driving mode（ABS： Absolute Mode）
Display as below when selects ABS.
←、→、↑、↓ press any key, start to drive in each parameter
←、→ key： X(Z,V)axis drive to setting position
↑、↓ key： Y(U,W)axis drive to setting position
STOP key : Stop all axes
＊ Press shortcut key（Set key）, display 「Set up absolute value driving position」
（Return to absolute driving mode screen with Set key）
4.1.3.4 Origin return mode（ORG： Origin Mode）
Display as below when selects ORG.
←、→、↑、↓ press any key, start origin return at “ Origin Type ” of parameter.
After origin return finished , display“*” at “ status ” of main screen.
←、→ key： X(Z,V)axis return to origin
↑、↓ key： Y(U,W)axis return to origin
STOP key： Stop all axes
＊ Press shortcut key（Set key）, display「Set up origin return type」
（Return to origin return mode screen with Set key）
4.1.3.5 Home position return mode（HOM：HOME）
Display as below when selects HOM.
Move the position that set by “Home Position”of parameter when press any key←、→、↑、↓ After
home position return finished, display “H”at
“ status ” of main screen.
←、→ key： X(Z,V)axis return to home position
↑、↓ key： Y(U,W)axis return to home position
STOP key ： Stop all axes
※ Press shortcut key,（Set key）, display「Set up home position」
（Return to return mode screen with Set key）
A X 1 2 3 4 5 6 7 8 p < 0
Y - 9 8 7 6 5 . 4 3 2 u > 1
Operation mode
ＡＢＳ mode
O X 1 2 3 4 5 6 7 8 p < 0
Y - 9 8 7 6 5 . 4 3 2 u > 1
Operation mode
ＯＲＧ mode
H X 1 2 3 4 5 6 7 8 p < 0
Y - 9 8 7 6 5 . 4 3 2 u > 1
Operation mode
ＨＯＭ mode