GEmini 1-P
S
i
PAir
U
r
Guide
MISSION
ENGINE
ING
Mission Engin
ring
Inc.
www.missionengineering.com
Mission Engineering Inc. 2014. All rights reserved. GEMINI 1-P-SP
is a Trademark of Mission Engineering Inc. Trademarks, registered
trademarks, product names, logos and other materials are the
property of their respective owners.
SAFETY WARNING
THE POWER AMPLIFIER SHOULD ALWAYS BE
CONNECTED TO THE MASTER CABINET ONLY.
NEVER CONNECT A POWER AMPLIFIER
OUTPUT DIRECTLY TO THE LINK CONNECTION
ON THE SLAVE CABINET.
THE GEMINI 1-P-SP LOOPBACK PLUG SHOULD
ONLY BE USED IN THE GEMINI 1-P-SP MASTER
LINK CONNECTOR FOR ENABLING SOLO
MODE.
NEVER CONNECT THE LOOPBACK
CONNECTOR TO ANOTHER DEVICE AS SHORT
CIRCUIT MAY OCCUR.
Ecifi
tions
Power Handling, Series Pair Mode: 500W RMS
Power Handling, Solo Mode: 250W RMS
Frequency Response: 66Hz - 20KHz +_ 2dB
Crossover: Passive at 2.5KHz
Impedance: 16 Ohm in Series Pair Mode
Impedance: 8 Ohm in Solo Mode
Input: Combo Speakon ¼” jack
Link: Combo Speakon ¼” jack
