Mirta IRS 330, Инструкция по эксплуатации, Страница: 21 / 38

Water spray
To damp the laundry press “water spray” button (2).
Dry / Steam
You can fix the steam intensity directly by using the steam function “0”= steam dry
= maximum steam outflow.
Burst of steam
To use a burst of steam press “burst of steam” button (2).
Attention: Use the steam button when the steam iron is set to the steam or to the
maximum temperature.
Do not press this button more than 3 times at once.
Keeping/Cleaning/Care
Switch the steam iron off (Set the temperature to the minimum; see the mark on
the water tank) and unplug. Place the steam iron upright and let it cool down
completely. Empty the water tank.
Remove residues from the steam soleplate with a vinegar-water solution. Wipe the
body with a damp cloth and finally wipe it dry.
Automatic electricity interruption for security
In case the installed thermostat gets out of order the power supply will be
interrupted automatically to avoid the steam iron to overheat. In this case the
steam iron must be repaired by the service center.
Self-Cleaning
Self-cleaning function is provided to clean the water tank. The harder the water
is, the more often you should use this function.
* Fill the water tank half with water.
* Place the steam iron upright.
* Set the thermostat (7) to the “max” position and plug the steam iron in.
* Wait until the steam iron gets completely hot (the pilot light will switch off).
* Unplug the steam iron.
* Hold the steam iron horizontally over the basin.
29
USE