manualshive.com logo in svg

Miromico LoRaWAN FMLR PicoCell, Быстрый старт, Страница: 6 / 8

Поделиться
Скачать
Miromico LoRaWAN FMLR PicoCell Скачать руководство пользователя страница 6

2.5

Trigger Firmware Update

The Firmware Update can be done at any time and requires the latest Firmware File 

available on 

https://miromico.ch/portfolio/fmlr-gateway/

Navigate into the Downloads > Software Section to see the latest Firmware Files

1. Open the Menu: System > Backup / Flash Firmware

2. In the Sub Menu “Flash new firmware image” check the Box “Keep Settings” if you would

like to stay with the current setup of the gateway.

3. Press the “Browse” Button and select the previously downloaded image File Named 

“lks7688.img”.

4. Press the “Flash image...” Button to perform the Firmware Update
5. The Update Process will take around 5 Minutes and the FMLR PicoCell Gateway will 

restart automaticly.

Attention:

Please make sure that the FMLR PicoCell Gateway is connected to a stable power supply.

Any power loss while updating the device may damage the device beyond repair

Miromico AG - Gallusstrasse 4 - CH-8006 Zurich – Switzerland

Revision 1.1196

6/8

Содержание LoRaWAN FMLR PicoCell









Отзывы:

Нет отзывов