Mircom FA-300 Series, Инструкция по установке и эксплуатации

Страница: 76 / 106

76
Configuration with the CFG-300 LCD Service Tool
11.8 6. Clear Event Log (Command-Menu)
Use this menu to clear alarm logs, event logs, or both.
Figure 42 Select Log
1. Select the type of log to clear. Press the ENTER button. The system confirms before
clearing logs.
Figure 43 Clear all the selected logs
2. Press the ENTER button to confirm or the CANCEL button to cancel the operation.
Figure 44 Logs cleared
11.9 7. Walk Test (Command-Menu)
A walk test allows an installer to verify the initiating circuit wiring in a system. When walk test is
selected, the following screen appears:
Figure 45 Walk test confirmation
Note:
Refer to 11.2.1 Using the Keypad to Program the FA-300 on page 61 for detailed
instructions on making menu selections.
Note:
Refer to 11.2.1 Using the Keypad to Program the FA-300 on page 61 for detailed
instructions on making menu selections.
i
- S e l e c t L o g -
1 A l a r m L o g
2 G e n e r a l L o g
3 A l l L o g s
C l e a r a l l t h e
s e l e c t e d l o g ( s ) ? Y
L o g ( s ) c l e a r e d
i
P e r f o r m t h e
w a l k t e s t ? Y