Mirapoint RazorSafe 170, Руководство по оборудованию, Страница: 44 / 76

Installing Appliance Components
44
2
6.
Replace the system-board shroud. See Installing the Cooling Shroud on
page 42.
7. Close the system-board. See Closing the Appliance on page 30.
8. Reconnect the appliance and peripherals to their power sources, and power
them on.
Installing Memory Modules
w
The memory modules and heat sink can get very hot during normal operation.
Ensure that the memory modules and heat sink have had sufficient time to cool
before you touch it.
c
Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product
documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized is not covered by your warranty.
Read and follow the safety instructions that came with the product.
c
Never operate your appliance with the cooling shroud removed. The appliance may
get overheated quickly, resulting in shutdown of the appliance and loss of data.
To install memory modules:
1. Power off the appliance, including any attached peripherals, and disconnect the
appliance from the electrical outlet.
2.
Open the appliance. See Opening the Appliance on page 30.
3. Remove the system-board shroud. See Removing the Cooling Shroud on
page 41.
4. Locate the memory module sockets ( Figure 21 on page 72).
5.
Press the ejectors on the memory module socket down and out, as shown in
Figure 13 on page 45, to allow the memory module to be inserted into the
socket.
6. Handle each memory module only on either card edge, making sure not to
touch the middle of the memory module.