Miranda NV9642, Руководство пользователя

Страница: 72 / 98

62 Rev 1.0 • 13 Oct 09
5. Operation
Setup Mode
• Software Versions.
In the setup menu, press the ‘Software Versions’ button. The display shows the version num-
bers:
• Panel Test Mode.
In the setup menu, press the ‘Panel Test Mode’ button. One button appears:
Press the ‘Push to Test’ button repeatedly to execute the test. When you do so, the display
shows a ‘#’ in all character positions.
Each time you press the button, the panel illuminates all its LCD buttons in a single color,
changing the color each time you press the button. Keep pressing the button until all 7 colors
(high and low tally) have been displayed and ‘Button Number’ appears on the display.
Press any button. The button will flash and the button number will appear on the display. You
may continue to test different buttons.
When you are finished using the setup menu, press ‘Exit’ one or more times to return the panel to
its normal pre-connected state.
When you connect the panel to its network, the panel leaves its setup state and begins to initialize in
its normal operational state. After a short time, the panel will have initialized to its configured state
and will display its default button page.
APPLICATION S/W: APPLICATION S/W:
SV0947-02 A0 SV0947-02 A0
FIRMWARE VERSION: 00
FIRMWARE VERSION: 00
PUSH PUSH
TO TO
TEST TEST
• • •