Miranda NV9642, Руководство пользователя

Страница: 67 / 98

NV9642 Control Panel • User’s Guide 57
5. Operation
Operating Concepts
In MD mode, the X-Y Display button shows (1) current source, (2) preset source, and (3) destina-
tion for one of the selected MD devices — the first one if more than one are selected.
XY/MD Mode
This button switches the panel between X-Y and multi-destination modes.
The button is green for X-Y mode and amber for multi-destination mode.
The button text changes to read “XY-MD In XY Mode” or “XY-MD In MD Mode” according to
the mode you have selected. The alphanumeric display also reflects the current mode.
Lock, Protect, and Release
In a multi-user system, routes made by one user can be made safe from being accidentally or mali-
ciously change by another user.
Definitions
Owner The user ID of a panel where a lock or protect was issued.
Source lock No one can use the source.
Source protect No one but the owner can use the source.
Destination lock No one can route to the destination.
Destination protect No one but the owner can route to the destination.
Release To remove a lock or protect.
Some control panels can lock or protect both sources and destinations. However, The NV9642 pro-
vides locks and protects for destinations only .
A forced release is when the lock or protect is removed by someone other than the owner. A forced
release can be performed:
• At any panel configured with release mode set to “forced release”.
• At any other panel with “force release” enabled.
The ‘Destination Lock’ and ‘Destination Protect’ buttons are toggles. Press the lock (or protect)
button to lock (or protect) a destination. Press the button again to release the lock (or protect).
Takes
Following are brief instructions on how to perform a take in 3 scenarios.
XY Mode
1 If required, enter X-Y mode. (Use the XY/MD button.)
2 If required, select a destination.
3 Optionally choose levels.
4 Select a source and press ‘Take’.
OR
5 Select a quick source. The take is automatic.