Miranda NV9602, Руководство пользователя, Страница: 27 / 68

NV9602 Control Panel • User’s Guide 17
4. Configuration
Panel Options
Checkbox Options
The checkbox options section is just below the panel options section, enclosed in the same region:
A check in the box enables the option. Clearing the checkbox disables the option.
By default, all the check box options are clear.
The following items are the checkbox options:
• User-Programmable ID.
Allows the Panel ID to be changed locally at the control panel (in menu mode).
• Source Master Default.
Makes a control-level source the controlling device (or master device) by default. Otherwise,
the destination is the master by default. (The option is specifically for use with NVISION series
machine control routers.)
“Source is master” is used for duplication, or broadcast routing, on a machine control level.
“Destination is master” is for machine-to-machine editing. If you do not select the “source mas-
ter default” option, you can place a ‘Source is Master’ button on the panel.
S
Note: a ‘Source is Master’ button is a toggle that reverses the direction of data routing for
devices used in data level (machine control) takes.
• Hold preset default.
When this checkbox is checked, the panel powers up in “hold mode.” Otherwise it powers up
with hold mode off.
Hold mode, under single-destination mode with breakaway, causes the selected levels to be
retained after a take. If hold mode is off, all levels become selected after a take.
Hold mode, under limited X-Y mode, allows a user to route a source to multiple destinations
simultaneously.
• Hide sources not configured on this panel.
Causes the names of source devices that are not presently configured for this particular panel to
be effectively hidden. When another panel changes the source to one not configured for this
panel, this panel displays asterisks instead.