Miranda Kaleido-X16, Руководство по описанию и установке оборудования

Страница: 20 / 82

14
Kaleido-X16 Installation
Video and Graphic Output over the MV-Out Connection
1
Video and Graphic Output over the MV-Out Connection
You can use a Multi-Viewer Output connection as a DVI-Out by doing one of the following:
• Use a cable with both ends compatible with the MV-Out connector, and connect one end to an adapter
that converts to DVI.
• Use a cable with one end compatible with the MV-Out connector and the other end compatible with
DVI.
There is one Multi-Viewer (MV) Output for each Output Head. The MV-Out connection is a high definition
connection for the multi-viewer output and can support resolutions up to 1920x1200 at 60Hz. The
connection is based on TMDS technology as used to interconnect industrial and consumer displays. Single-
link DVI-D cables (and cables electrically compatible to this) are supported. Since there are two user-
assignable Outputs already available on the system, the Outputs can be paired with the AES and Analog
Output.
External Reference
The external reference (or REF) input signal allows the Kaleido-X16 to genlock to the local plant.
See also: For more information about Video signal input specifications, see “Video Signal Inputs” on page 61.
See also: For more information about Mosaic Video and Graphic Outputs over the MV-Out connection, see “MV
Outputs” on page 63.
See also: For more information about external reference input specifications, see “Reference Input” on page 72.
MV-Out 1/DVI-Out 1 MV-Out 2/DVI-Out 2
BNC connector for
External Reference