Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 83 / 388

Triggering Actions
73
5. Click the Start button to start the timer.
Controlling a Timer by Using an External Numeric Keypad
If a timer is assigned to the current RCP user, or else if a timer is assigned by default for the room, then the
external keyboard’s numeric keypad controls this specific timer.
Note: The reserved keys are always enabled, whether Num Lock is set or not.
To configure your assigned timer, by using a numeric keypad:
• Press the slash key (“/”) to set the timer mode and end behavior. Keep pressing the key to cycle through
all the available options, until the buttons show the appropriate settings.
• Press the plus key (“+”) to reset the timer. (This will also stop the timer if it was running.)
• Press the Enter key to start/pause the timer.
• Use the number keys to set or modify the preset time.
Triggering Actions
To trigger an action:
1. Move the pointer over a widget associated with the action you wish to trigger.
The pointer changes to a hand icon.
2. If the action is not triggered automatically, click or double-click the widget.
Note: An Action’s trigger is determined when the Action is created in XEdit. See “Creating Actions” on
page 243 for more information.
Triggering GPI Output Events
To trigger a GPI output event:
1. In XEdit, configure the appropriate GPI line’s direction as an output (system calibration).
2. Create an action to toggle the GPI output on/off state, and assign it to a widget.