Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 307 / 388

297
2. When prompted, enter a name:
3. Click the Interconnects tab, then draw a line between the Kaleido-X and the newly added router
controller:
4. Click the Properties tab, then click in the field beside Connection > RS-422 Com Port . Choose an
output card from the list:
Note: Simple router controllers can also communicate with Kaleido-X via TCP/IP. This type of
connection is enabled automatically, and allows such controllers to issue commands to the internal
router cards.
5. Under the Interconnects tab, click the router controller icon. Under the Properties tab, a list of
settings appears, with defaults for the serial communication parameters: the bit rate (bps), the