manualshive.com logo in svg

Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 204 / 388

Поделиться
Скачать
Miranda Kaleido-X (4RU) Скачать руководство пользователя страница 204

194

Creating Layouts

9

5. In 

Select image

, select the image file from the Image selection list, and then click OK.

Select Image window

The image appears in the layout background.

Setting up a Layout to use the DVI Background Input

Note: 

Since the DVI background input cannot be resized, the resolution on the PC that feeds this input is 

best set to match the selected display’s (head) resolution. The DVI background is always positioned from 
the top-left corner of the display and is drawn pixel for pixel. If the resolutions do not match, some part of 
the DVI input might be missing or noise might be displayed.

To use the DVI background input on a display in a layout:

1. Click the background of the layout on the appropriate display.

Содержание Kaleido-X (4RU)





































































































































































































































































































































































































Отзывы:

Нет отзывов