Miranda Kaleido-X (4RU) Скачать руководство пользователя страница 197

Страница: 197 / 388

Managing Layouts

187

3. Click the name of the room where this layout will be displayed.

An empty layout appears.

4. Add at least one widget to the layout.

5. Assign every widget a channel. See “Adding Widgets to a Layout” on page 188.

6. On the File menu, click Save. Alternatively, click the Save button on the toolbar.

The Save Layout window appears.

Save Layout window

7. Type a name for the layout.

8. Click Save.

Creating Full Screen Layouts

To create a full screen layout:

1. Click the Layouts tab in the main window.

2. On the File menu, click New.

Содержание Kaleido-X (4RU)





































































































































































































































































































































































































Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы:

Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 197 / 388

Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы: