Miranda Kaleido-X (4RU) Скачать руководство пользователя страница 187

Страница: 187 / 388

Configuring Displays

177

2. Click the Width box in the Properties pane.

Width property

3. Select the appropriate unit of measurement from the list that appears inside the Width box and type

the width.

Changing a Display’s Rotation

Note:

The

KXS-Rotator

option (Rotation License for Portrait Display) must be enabled on the KXO-Dual card

for rotation to work properly on the monitor wall. The option can be enabled and verified in XAdmin’s

Status and Options

page (see “Enabling Options” on page 359).

To change the rotation setting for a display in a room:

1. Click the display whose properties you wish to configure.

2. Click the Rotation box in the Properties pane.

Содержание Kaleido-X (4RU)





































































































































































































































































































































































































Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы:

Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 187 / 388

Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы: