Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 146 / 388

136
Calibrating the Kaleido-X
5
You can type the value directly in the boxes, or use the slider controls.
6. On the File menu, click Save. Alternatively, click the Save button on the toolbar.
Calibrating GPI Lines
You can define actions that change the state of a GPI output line, and assign them to a widget. GPI lines
configured as outputs can have their ON/OFF state set manually in XEdit, for test purposes.
To configure a GPI line’s direction as an output:
1. Click the System tab in the main window.
2. On the Configure menu, click Connect, if you wish to apply the changes in real time. If the connection
succeeds, “Connected to [IP address]” will appear in the status bar.
Note: If this step is omitted, then you will need to export the database to apply the calibration
changes.
3. Expand the System root, and the Kaleido-X frame.
Note: In the case of an expansion system, then you need to first expand the dual frame element, under
which both frames A and B are listed.
4. Expand the GPI/GENLOCK router card, and then click the appropriate GPI line element.
5. In the Properties tab, click the GPI Direction box, and then select output from the list.
6. Click Apply to all, if every GPI line in your system is to be configured as an output.
7. To set this GPI output line’s ON/OFF state set manually for test purposes, click the GPI Out box, and then
select either ON or OFF from the list.
8. On the File menu, click Save. Alternatively, click the Save button on the toolbar.