Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 140 / 388

130
Calibrating the Kaleido-X
5
5. In the Properties pane, click the Switch Field Selection box, and then select the appropriate field value
from the list.
Switch field selection
6. On the File menu, click Save. Alternatively, click the Save button on the toolbar.
Calibrating SDI Signal Reclocking
To calibrate reclocking of a router card’s output signal:
1. Click the System tab in the main window.
2. On the Configure menu, click Connect, if you wish to apply the changes in real time. If the connection
succeeds, “Connected to [IP address]” will appear in the status bar.
Note: If this step is omitted, then you will need to export the database to apply the calibration
changes.
3. Expand the System root, and the Kaleido-X frame.
Note: In the case of an expansion system, then you need to first expand the dual frame element, under
which both frames A and B are listed.
4. Expand the appropriate router card, then one of its Output signals, and select SDI Output Reclocking.
SDI Output Reclocking selection