Miranda Kaleido-X (4RU) Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 388

Miranda Kaleido-X (4RU) Скачать руководство пользователя страница 106

96

Managing Kaleido-X Systems

4

5. Select the relevant third-party devices in the equipment library and drag them onto the root of the

System hierarchical list in the main window. Alternatively, right-click the list root, and then click the
appropriate third-party device on the shortcut menu.

Shortcut menu

All third-party devices added to the system appear in the System list.

6. On the File menu, click Save. Alternatively, click the Save button on the toolbar.

Changes to the system are saved.

Creating a Cluster System

Cluster systems can only be created and configured in online mode. Creating a cluster system involves the
following steps:

• connect to a first Kaleido-X frame

• add more frames to the system

• configure new rooms that include displays fed by the different frames

• create layouts for the new rooms

• replicate RCP users from one frame to all other frames that are part of the cluster system

• replicate custom display resolutions from one frame to all others

«
...
104
105
106
107
108
...
»

Содержание Kaleido-X (4RU)





































































































































































































































































































































































































Отзывы:

Нет отзывов