Miranda Kaleido-X (4RU) Скачать руководство пользователя страница 101

Страница: 101 / 388

Backing Up the Current Database

Backing Up the Current Database

To back up the current local database:

1. On the Configure menu, point to Database, then to Create backup and click All.

Database backup menu

2. In the window that appears, select the location where you wish to save a backup copy of the current

database content, and then click Save.
The database is saved as a ZIP file.

Backing Up Resolutions

To back up resolutions from the local database:

1. On the Configure menu, point to Database, then to Create backup and click Resolutions.

2. In the window that appears, select the location where you wish to save a backup copy of the

resolutions from the current database, and then click Save.
The resolutions are saved as an XEdit collection file, with a

.xcol

extension.

Backing Up Audio Scales

To back up audio scales from the local database:

1. On the Configure menu, point to Database, then to Create backup and click Audio scales.

2. In the window that appears, select the location where you wish to save a backup copy of the audio

scales from the current database, and then click Save.
The audio scales are saved as an XEdit collection file, with a

.xcol

extension.

Содержание Kaleido-X (4RU)





































































































































































































































































































































































































Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы:

Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 101 / 388

Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы: