MIR MIR600, Быстрый старт

Страница: 51 / 54

7. Getting started
MiR600 Quick Start (en) 08/2021 - v.1.1 ©Copyright 2021: Mobile Industrial Robots A/S. 51
4. When the robot finishes the shutdown process, the status and the signal lights go off.
When you shut down the robot for transportation, service, or repair, the battery must be
disconnected—see your robot's user guide for instructions on disconnecting the battery.
7.11 Charging the robot
This section describes how to charge MiR600 using a MiR cable charger.
A MiR cable charger is not part of the MiR600 standard delivery. Contact your
distributor for more information.
To charge MiR600 with a standard MiR cable charger, you will also need an
adapter for the cable to fit to the battery connector. The adapter is supplied by
MiR.
The robot is delivered 40-60% charged.
The left side compartment holds the robot's battery. To access the side compartments, see
Accessing the internal parts on page 21 .