Spirolab
Rev.1.8
Page 13 of 60
1.3
Labels and symbols
1.3.1
ID label
The symbols are described in the table below:
SYMBOL
DESCRIPTION
Model
Product name
SN
Device serial number
Manufacturer's name and address
0476
CE mark for medical devices: this product is a Class IIa medical
device that is certified and in compliance with the requirements of
Council Directive 93/42/EEC
Electrical safety symbol: as per IEC60601-1, the product and its
component parts are type BF and therefore offer protection against
electrical shocks
Class II equipment symbol: as per IEC60601-1, the product complies
safety requirements of Class II equipment while so charging the
battery
WEEE symbol is mandatory to European Directive 2012/19/EEC
on Waste Electrical and Electronic Equipment. On completion of its
useful life, this appliance must not be disposed of as urban waste but
must be sent to an authorised WEEE waste disposal centre. The
device can also be sent back to the original supplier free of charge
when a new equivalent model is bought.
Due to the materials used in its manufacture, disposal of the device
as urban waste could harm the environment and/or health.
There are legal penalties in place for those who fail to observe the
legal requirements mentioned here
IPX1
Information on protection against ingress of liquids. The label
indicates the degree of protection against ingress of liquids (IPX1).
The device is protected against vertically falling drops of water
