MIOX RIO Zuni 1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 7 / 46

MIOX RIO Zuni™ Operators Manual
P/N: 102-00094-I Page 7
System Specifications
RIO Zuni 1 RIO Zuni 2
Rated FAC Capacity
1.0 lbs/day
0.45 kg/day
2.0 lbs/day
0.9 kg/day
Salt Conversion (SCE)*
3.0 - 3.5 lb. salt/lb. FAC
3.0 - 3.5 kg salt/kg FAC
Energy Conversion (ECE)*
3.5 kW-hr/lb. FAC
7.7 kW-hr/kg FAC
FAC Concentration* 4,000 mg/L (+/- 1,000)
Salt Quality Requirement 99.5% NaCl or better^
Water Hardness 0-17 mg/L
Maximum Silica Limit 20 mg/L
Flow Rate
#
1.3 gph
4.9 lph
2.7 gph
10.2 lph
Electrical Service Requirement
+
(OSG Only)
110 VAC to 240 VAC, 1 ph, 2A,
50/60 hertz
110 VAC to 240 VAC, 1 ph, 4A,
50/60 hertz
Air Temperature Required
40
°
F to 110
°
F
4 ° C to 43 ° C
Recommended Feed Water
Temperature*
55 ° to 80 ° F
12
°
to 27
°
C
Allowable Feed Water
Temperature*
40° to 95° F
4° to 35° C
Feed Water Pressure @
1 - 75 psi
6.8 – 517 kPa
Approximate OSG Dimensions
(WxDxH)
20.75 x 15.66 x 13.5 inches
52.71 x 39.78 x 34.29 cm
Approximate OSG Weight
25 lbs
11.5 kg
Self-Cleaning YES
+
For continued protection against risk of fire, replace fuse only with a fuse of the same type and current rating
*Performance may vary depending on salt quality, water quality, and water temperature.
^Refer to MIOX Salt Quality Guidelines for more details.
#
Feed water flow rate is subject to +/- 15% variation.
@
Feed water pressure for RO Kit and/or Integrated Brine Tank is 40-75 psi
Table 1 : System Specifications