MIOX RIO Zuni 1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 22 / 46

MIOX RIO Zuni™ Operators Manual
P/N: 102-00094-I Page 22
OPERATION AND MAINTENANCE
Normal Operation
In normal operation, the RIO Zuni automatically enters ‘Run’ and ‘Standby’ modes based on
the oxidant level in the oxidant tank. The RIO Zuni will also automatically enter a ‘Cleaning’
mode on the first startup after a predefined number of operating cell hours.
The mixed oxidant solution generated by the OSG should be used as quickly as
possible to take advantage of the improved disinfection efficacy. If the mixed
oxidant solution is stored for more than 30 minutes before use, store it in a
vented and covered container made of HDPE. Properly stored mixed oxidant
solution will retain its disinfection efficacy for up to 5 days.
Interface elements
LED
The colored LED on the front of the OSG indicates the operational mode of the unit. Solid or
flashing green indicates that the system is normal operation conditions and is producing
oxidant. Solid or flashing yellow indicates a fault condition. Flashing blue indicates that
there may be a problem with the brine supply. The system will also flash blue to indicate the
system is about to run out of salt. Refer below for a more detailed breakdown of the various
operating modes and the behaviors associated with them.
Standby
The system is “turned off” and not generating nor attempting to generate oxidant
Safety
System in Standby
System in Normal Operation
System in Startup or Shutdown
System faulted and needs reset
System faulted and will automatically restart
System operating atypically – check brine and
salt supply
Figure 9: LED Indicator meanings