Page 8
Parts and Instruction Manual - TRS17 Total Recovery System
MAINTENANCE
Page 10
Parts and Instruction Manual - TRS17 Total Recovery System
MAINTENANCE
MAINTENANCE:
This TRS-17 has been engineered and built to require minimum maintenance. But like any machine, it
does require some care to keep it in optimum working condition. Careful attention to these maintenance
instructions will give you maximum operating performance and life expectancy of the machine.
CAUTION: Disconnect the power cord from the outlet before doing any clean up or maintenance
on the machine
1. Keep the machine clean. Do not allow dust to accumulate on external surfaces or near any moving
parts.
2. After every job, wipe down the surface of the machine with a clean damp cloth.
3. Inspect cord for damage. Do not use machine with a damaged cord.
PERIODIC MAINTENANCE
t
Use only chemicals safe for extractors
t
Adhere to the appropriate mix ratios for all chemicals
t
Do not add chemical to the solution tank- use the chemical feed system or pre-spray
t
For optimal performance, it is suggested that the operator flush the system after every job or at the
end of the day.
t
Pump seals and valves may need to be replaced at the 1000 hour mark if a loss in pressure is noted
t
The pressure regulator may require servicing should a pressure drop be noted
Daily:
t
Flush chemical lines with water by placing clean water in the solution tank and using the pump to
spray.
t
Check and clean vacuum filter
Weekly:
x
Check for obstructions in vacuum pathways
x
Quarterly:
x
Check pump, plumbing and fittings for leaks
x
Check power cords and hoses for tears
x
Check and clean solution filter
