Minuteman SW5X PB40PH, Инструкция по эксплуатации

Страница: 51 / 144

6.11.1 Replace Cylinder Broom V-Belt
- Turn engine off and pull key.
- Secure machine by engaging
parking brake.
- Remove bottom right fairing (turn
locks counter-clockwise by square
spanner).
- Detent tensioning spring (Fig.
29/15) by left hand while taking the
V-belt off the tensioning roller with
right hand.
- Remove V-belt (Fig. 29/13).
Proceed in inverse order for moun-
ting.
6.11.2 Replace Side Brush V-Belt
- Turn engine off and pull key.
- Secure machine by engaging par-
king brake
- Remove bottom right cover (turn
locks counter-clockwise by square
spanner).
- Remove cylinder broom V-belt (as
described in paragraph "Replace
Cylinder Broom V-Belt")
- Loosen screws (Fig. 29/10) at the
cover plate and remove
- Remove cover plate
- Push side brush from the front side
in direction of the machine to detent
V-belt (Fig. 29/11)
- Remove V-belt (Fig. 29/11)
Proceed in inverse order for moun-
ting.
6.11.3 Replace Suction Fan V-Belt
- Turn engine off and pull key.
- Secure machine by engaging par-
king brake
- Open seat hood
- Loosen hexagon nuts (Fig. 29/6)
and remove together with belt guide
(Fig. 29/5)
- Detent V-belt (Fig. 29/7) with ten-
sioning roller lever (Fig. 29/19) and
take from the belt pulley
- Loosen tensioning roller (Fig. 29/2)
and detent the V-belt, and then re-
move.
Proceed in inverse order for moun-
ting.
Maintenance/Service
51