SNMP-NV6
Page 8
4. Configuration Methods
The easiest way to configure the SNMP-NV6 card is to run the
EzSetting
program, which
you can find on the provided CD. Once you have configured the essential network
parameters successfully, you can launch a Web Browser or telnet to the SNMP-NV6 card to
execute more detailed configuration.
4.1 Configure the SNMP-NV6 card by EzSetting
1.
Prepare a workstation (Microsoft Windows 2000, 2003, 2008, XP, Vista, Win7 or
later).
2.
Make sure both of the dipswitches of the SNMP-NV6 card are set to the
OFF
position (normal mode) to enable the network transmission.
3.
Make sure the workstation and the SNMP-NV6 card are in the same LAN.
4.
Connect the Network cable to the Network Port on the SNMP-NV6 card.
5.
Put the CD in and open the
EzSetting
program.
Note:
The Windows Firewall may need to be turned off while using the EzSetting
program.
6.
Press the
Discover
button to search for all of the SNMP-NV6 cards in the LAN. All
of the SNMP-NV6 cards will be listed in the
Device List
as shown below.
7.
If you want to search all of the SNMP-NV6 cards in a different domain network, just
change the
Subnet
and
Subnet Mask
and then press the
Discover
button to list
them.
8.
If the SNMP-NV6 card cannot be found, check the networking port UDP 3456 in the
OS. Open it if it is blocked.
