Minuteman Lumina 20 M26036TD Скачать руководство пользователя страница 4

 

IMPORTANT SAFETY INSTRUCTIONS 

CAUTION:

 Operators must read and understand this manual before operating or 

maintaining this machine. 
 
Keep hands and feet clear of moving parts while machine is in operation. 
 
Disconnect the power to the machine by pressing the Red Emergency Disconnect Button 
when charging batteries or during installation or removal of pads. 
 
During operation, loose objects on the floor can become dangerous projectiles if struck by 
the high speed pad. Special attention should be paid in removing or avoiding loose floor 
tile, electrical cables, telephone connection boxes.   
 
Electrical motors and components can cause an explosion when operated near explosive 
materials Or vapors. Do not operate this machine near flammable materials such as 
solvents, thinners, fuels, grain dust, etc.    
 
Keep machine moving to reduce the risk of damaging floor finish and floor. 
 
Make sure the Red Emergency Disconnect Button is pressed and the battery connector is 
unplugged from the machine before performing any maintenance procedures.   
 
Store or park this machine on a level surface only. 
 
These machines are designed for level floor operation only. Do not operate on ramps or 
inclines. 
 
Battery acid can cause burns. When working on or around batteries, wear protective 
clothing and safety glasses. Remove metal jewelry. Do not lay tools or metal objects on 
top of batteries. 
 
Charging batteries generates explosive gases. DO NOT CHARGE BATTERIES WHEN 
OPEN FLAMES OR SPARKS ARE PRESENT. DO NOT SMOKE. Make sure the charger 
is turned off before disconnecting it from the machine. Charge the batteries in a well-
ventilated area with the battery cover removed completely.   
 
Maintenance and repairs must be performed by authorized personnel.  
 

SAVE THESE INSTRUCTIONS 

 
 

 

4

Содержание Lumina 20 M26036TD



























Отзывы: