Minuteman EZ Mop 360 degrees Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 28

Minuteman EZ Mop 360 degrees Скачать руководство пользователя страница 18

Page 18

EZ Mop 360° User Manual

FILLING PROCEDURE:

1. Remove the fi ller plug 1.
2. Pour the required quantity of the chemical product into the tank, considering the percentage (%)

indicated by the supplier, according to the full tank capacity indicated on the product sheet.

3. Using the graduated container, pour water into the fi lling inlet 2.
4. Close the tank with the plug 1.

5.8 FILLING AND EMPTYING THE TANK

NOTE:
The temperature of the water or the detergent added should never exceed 50°C.
Always empty the recovery tank every time you fi ll the solution tank..

CAUTION

Use only products suitable for the fl oor and for the dirt that has to be removed.

CAUTION

Always use non-foaming detergents (low foam).
The use of other chemical products (such as sodium hypochlorite, oxidisers, solvents or
hydrocarbons) may damage or cause irreparable damage to the machine.

The machine has been designed for use with non-foaming and biodegradable detergents that are specifi c
for scrubber-dryers.

Follow the safety regulations indicated in the relative section and on the detergent container.

Use detergent with a PH value between a minimum of 3 and a maximum of 10.

NOTE:
For a complete list of suitable detergents available, please contact the machine
manufacturer.

«
...
16
17
18
19
20
...
»

Содержание EZ Mop 360 degrees





























Отзывы:

Нет отзывов