11
10
RACKMOUNT CONFIGURATION
This UPS series comes with mounting brackets for the standard 19" (46.5cm)
rack pre-installed on the UPS. The mounting brackets to fit a 23" (59.2cm)
rack and Rail Kits for 4-post racks and cabinets are also available. The
screws for mounting the UPS to the rack are included.
NOTE:
The Rail Kits
for a 4-post rack and/or cabinet are included with the ED3000RTXL2U.
CAUTION!
DO NOT USE THE MOUNTING BRACKETS TO LIFT THE
UPS.
The mounting brackets are
ONLY
for securing the UPS to the rack.
NOTE:
The mounting brackets can be mounted in the middle of the UPS.
1. Mount the UPS into the rack and secure with the retaining screws.
WARN-
ING:
Use two or more people when installing the UPS, the UPS is extrem-
ely heavy. Do not move the rack after the units have been installed. The
rack may become unstable due to the weight distribution.
2. The Rackmount Configuration is complete. See Connecting your Equipm-
ent.
CONNECTING THE BATTERIES
(QUALIFIED
SERVICE PERSONNEL ONLY)
Please read all of the
WARNINGS
and
CAUTIONS
before attempting to con-
nect the batteries.
WARNING:
Use two or more people when installing the UPS, the UPS is
extremely heavy.
1. Remove the UPS from the shipping box.
2. Place the UPS on a flat surface and then remove the front panel retaining
screws.
3. Lay the front panel on top of the UPS.
4. Verify proper polarity. Connect the battery connectors (red and black)
together.
NOTE:
Some sparking may occur this is normal.
5. Re-install the front panel onto the UPS.
6. Re-install the front panel retaining screws.
7. Connecting the Batteries is complete. See the Rackmount Configuration.
CAUTION!
DO NOT USE THE MOUNTING BRACKETS TO LIFT THE
UPS.
The mounting brackets are
ONLY
for securing the UPS to the rack.
