background image

23

22

BATTERY REPLACEMENT PROCEDURE

PLEASE READ THE CAUTIONS AND WARNINGS BEFORE ATTEMPTING
TO REPLACE THE BATTERY MODULE

Hot-swappable batteries mean that the battery modules can be replaced with-
out powering down the whole UPS system.

NOTE:  

If there is a power interruption while replacing the hot-swappable bat-

tery module, with the UPS on, the load will not be backed up.  To hot-swap the
battery module start with step number 6.
1. Turn off the equipment that is plugged into the output receptacles of the

UPS.

2. Press and release the On/Off/Test button on the front panel to turn the UPS

OFF.

3. Unplug the UPS's AC power cord from the AC wall outlet.
4. Unplug the equipment from the output receptacles of the UPS.
5. Unplug the computer interface cable from the rear panel of the UPS.
6. Remove the front panel retaining screws. (FIG. 2)
7. Lay the front panel on top of the UPS.

ED1000RTXL2U

ED2000RTXL2U

Internal
Battery
Module
Part #

BM0035

BM0037

ED3000RTXL2U

BM0032

Model #

ED1500RTXL2U

BM0036

Chapter 8:  Replacing the Battery

WARNING!

  This UPS contains potentially hazardous voltages.  Do not at-

tempt to disassemble the UPS beyond the battery replacement procedure.
This UPS contains no user serviceable parts.  Repairs and battery replace-
ment must be performed by

 QUALIFIED SERVICE PERSONNEL ONLY.

CAUTION:

  Do not open or mutilate batteries.  Released electrolyte is harmful

to the skin and eyes and may be toxic.

QUALIFIED SERVICE PERSONNEL ONLY

CAUTION:

  Do not dispose of batteries in a fire.  The batteries may explode.

The batteries in this UPS are recyclable.  Dispose of the batteries properly.
The batteries contain lead and pose a hazard to the environment and human
health if not disposed of properly.  Refer to local codes for proper disposal
requirements or return the battery to the supplier.

CAUTION:

  The battery system can present a risk of electrical shock.  These

batteries produce sufficient current to burn wire or tools very rapidly, produc-
ing molten metal.  Observe these precautions when replacing the batteries:
1. Remove watches, rings, or other metal objects.
2. Use hand tools with insulated handles.
3. Wear protective eye gear (goggles), rubber gloves and boots.
4. Do not lay tools or other metal parts on top of batteries.
5. Disconnect the charging source prior to connecting or disconnecting the

battery terminals.

6. Determine if the battery is inadvertently grounded.  If the battery is, remove

the source of the grounding.  Contact with any part of a grounded battery
can result in an electrical shock.  The likelihood of such shock will be redu-
ced, if such grounds are removed during installation and maintenance.

Please read all of the 

WARNINGS

 and 

CAUTIONS

 before attempting to ser-

vice the batteries.

 

 Typical battery life is 3 to 5 years.  Environmental factors

do affect battery life.  High temperatures, poor utility power, and frequent,
short duration discharges have a negative impact on battery life.

CAUTION:

 Replace batteries with the same number and type as originally

installed in the UPS.  These batteries have pressure operated vents.  These
UPSs contain sealed non-spillable maintenance-free lead acid batteries.

FIG. 1

FIG. 2

Содержание ED3000RTXL2U

















Отзывы: