6
Remote Controller Explanation:
Definition of IR controller
0
、
Standby key
After pressing the standby key, the camera will step into
standby mode,while the front indicator light is off and sparks
every 20sec.Press again,the camera will do self-checking
again and back to home position.If power on mode set,it will
automatically run to the preset position.
1.Number key
Setting or locating presets
2.* key
Key combination use
3.Set preset key:
Set preset
：
Set preset key + 0-9 number key
：
Clear preset key
：
Clear preset key + 0-9 number key
or
：＃
+
＃
+
＃：
clear all the presets
4.BLC control key
BLC function is unavailable
5.Focus control key
Focus
＋：
focus length far from near
Focus
－：
focus length near from far
Auto focus
：
the camera focus mode is auto
Manual focus
：
the camera focus mode is manual
6.Camera address selection
Select the camera which want to be controlled
7. # key
Key combination use
8.pan/tilt control key
Press
key
：
up
Press
key
：
down
Press
key
：
left
Press
key
：
right
“HOME” key: Return to the middle position
9.Menu setting
Open or close the OSD menu
10.Zoom Control key
zoom
：
lens near
zoom
：
lens far
11.Camera IR remote control address selection