minrray UV910, Руководство пользователя, Страница: 25 / 40

24
3. Mode set command
Mode Setting Command
Massage Reply
Message Comments
Work Mode 0 a5 5a c0 FF aa bb cc FF
Work Mode 1 a5 5a c1 FF aa bb cc FF
Work Mode 2 a5 5a c2 FF aa bb cc FF
Romote
Controller
replace
command
C5 5C C0 HH II JJ
KK TT 00 00 00 FF
HH
0 ： forbid use new ID controller
1 ： active use new ID controller
II
0 ： replace end point controller
1
：
replace camera special
remote controller
JJ KK
New ID for remote controller,
value can’t be 00 or 0xFF
，
and
they should be complementary
TT
0: special controller or new ID
controller will not do
passthrough in mode 2.
1: special controller or new ID
controller will do passthrough
in mode 2.
Note
： 1. As in the mode 3, the lens parameter is setted by controller. So in order to avoid
wrong operation, this mode can only be set by controller.
2. Remote controller displace command”is the back-up command for further
upgrading, it rarely used in normal working.
4. Video output format
Video Setting Command Command Message Reply
Message
Comments
Video
Format
1080i60 81 09 05 00 FF
720p60 81 09 05 01 FF
720p30 81 09 05 02 FF This mode can not be
displayed on HDTV
1080p30 81 09 05 03 FF This mode can not be
displayed on HDTV
1080p25 81 09 05 04 FF
Once the video putput format be set, the camera can automatically
memory.
Image Tilt flip 81 01 04 66 02 FF