minrray UV910, Руководство пользователя, Страница: 21 / 40

20
9
、
The command of controller control the setting of lens parameter.
Setting: By pressing *+#+3, the camera will be switched to mode 3, then press the corresponding
number key for multi times to set the different parameter.
For example: to set
noise reduction,
Press *+#+3 to switch to mode 3,
Then press number key 2 for once, that means the noise reduction will be setted as HIGH.
Press the number key2 for second time, it is 1 MIDDLE,
Press the third time, it is 2 LOW,
press the 4
th
time, it is 3 OFF ；
Press for the 5
th
time, it return back to 0 HIGH,
After the successful setting of each time, the setting value will be output from COM, it will be more
convenient for the users to observe the setting status. Other setting will be also like this.
The special camera controller command list:
Number key function settings
1 flicker reduction 0 AUTO
1 OFF
2
noise reduction 0 HIGH
1 MIDDLE
2 LOW
3 OFF
3
sharpness reduction 0 HIGH
1 MIDDLE
2 LOW
4
expose mode 0 MANNUAL
1 PAE
2 AAE
3 SAE
5
ISO sensitivity 0 AUTO
1 MANNUAL
6
ISO correction 0 ISO80
1 ISO100
2 ISO 200
3 ISO 400
4 ISO 800
5 ISO 1200
this item is the setting of ISO sensitivity in MANMUAL mode