minrray UV510A-05-HD, Руководство пользователя, Страница: 34 / 42

31
Subnet Mask:
Set the wireless IP subnet mask (default255.255.255.0)
Default Gateway:
Set the wireless IP default gateway (default 192.168.1.1)
SSID:
The user can modify their own (the default test)
Encryption:
can check,the password can be set after checked.
Password:
can set password,password can be changed if only checked encryption.
Click on the "Save" button to display "Parameter saved successfully" message,set to take effect
Note: SSID and password should be filled in correctly, otherwise, if restarted after the powered off, the wireless WiFi
connection is not successful.
2)WiFi hot link
Click on the “search” button to search the WIFI hotspot.
Double-click the dialog box after searched user WIFI hotspot,and then input password to connect WIFI. It connected
successfully after shown “successful connect” window.
3)Wireless WiFi login page
If you do not check the above configuration DHCP (automatically obtain IP),then open the browser,enter the wireless
network IP address in the address bar (default 192.168.1.250),press Enter to log construction;If you checked DHCP,then
you obtain IP automatically,just login specific router or switch user interface settings to view the allocation of IP address.
5. Serial Communication Control
Under common working condition,the camera could be controlled through RS232/RS485
interface(VISCA),RS232C serial parameter are as follows:
Baud rate: 2400/4800/9600/115200 bits / sec; Start bit: 1; data bits: 8; Stop bit: 1; Parity: None.
After power on,the camera first go left,then back to the middle position.Self-test is finished after the zoom moved to the
farthest and then back to the nearest position. If the camera saved 0 preset before,it will be back to that position after
initialization.At this point,the user can control the camera by the serial commands.
5.1 VISCA protocol list
5.1.1 Camera return command
Ack/Completion Message
Command packet Note
ACK z0 41 FF Returned when the command is accepted.
Completion z0 51 FF Returned when the command has been executed.
z = camera address + 8
Error Messages
Command packet Note
Syntax Error z0 60 02 FF
Returned when the command format is different or when a command
with illegal command parameters is accepted
Command Not Executable z0 61 41 FF
Returned when a command cannot be executed due to current
conditions. For example,when commands controlling the focus
manually are received during auto focus.
5.1.2 Camera control command
Command Function
Command packet
Note
AddressSet Broadcast 88 30 0p FF p
：
Address setting
IF_Clear Broadcast 88 01 00 01 FF I/F Clear
CommandCancel 8x 21 FF
CAM_Power
On 8x 01 04 00 02 FF
Power ON/OFF
Off 8x 01 04 00 03 FF