minrray UV401, Руководство пользователя

Страница: 6 / 37

- 5 -
To
Rotary switch: Video system selection
RS232C
VISCA cable (supplied)
HDMI interface
USB 3.0 interface
Power switch:
Power cable (supplied)
To DC12V IN 12V (12V DC input)
RS485/RS422 interface
To another VISCA IN
To VISCA OUT (VISCA output)
3.5 mm audio input jack ToMIC
Network output interface
Computer, TV set orVCR
(video cassette recorder)
with video input jack
AC power adapter (supplied)
To AC (alternate
current)outlet
To VISCA IN (VISCA input)
1.2Wiring
Fig. 1.3 Wiring Diagram
1. If 0# preset position is set, the camera will turn to 0# preset position after power-on self-test.
2. The default address of remote control is 1#, the menu restoring factory default, and the address of
remote control returning to 1#.
1.3TALLY Lamp Control
1
）
During the power-on self-test of device, the state indicator flashes in green, the power indicator being off,
and the TALLY lamp flashing in red;
2
）
Upon completion of self-test of device, the state indicator is off, the power indicator being on
in red, and the TALLY lamp being off;
3
）
Serial port control command: 8x 01 7E 01 0A 00 0p 0q FF
[x] indicates the address of the device to be operated; 0p: Red lamp; 0q: Green lamp;
0p 0q: 02 03 Red lamp on, green lamp off;
0p 0q: 02 02 Red lamp on, green lamp off;
0p 0q: 03 02 Red lamp off, green lamp on;
0p 0q: 03 03 Red lamp off, green lamp off;