background image

Contact

(ver.1.2 2016/12)

[Applicable Wheel Size]

650c – 700c, 26 – 29 inch

[Applicable Wheebase Size]

950  – 1,200mm

Caution

• This trainer is designed for use only on stable or indoor surfaces. The trainer is not 

designed to be used in muddy or off road conditions. Getting dirt in the resistance unit 

could may cause damage. Using muddy or dirty tires will cause premature wear on the 

rollers.

• Using wheels smaller than 24" will put too much stress on the unit.
• When setting up the FG540 pedal slowly at first to make sure the rear wheel stays on 

the roller and is positioned properly.

Indoor Bike Trainer

(Shown with 700c road bike)

MINOURA North American Tech Center 

 

MINOURA Japan Headquraters

(for U.S. residents ONLY) 

    

(for ALL customers)

Hayward, California, U.S.A.   

 

 

 

1197-1 Godo, Anpachi, Gifu 503-2305 Japan

Phone: 1-510-538-8599  (8 am - 5 pm, Mon - Fri, PST) 

Phone: +81-584-27-3131

Fax:  1-510-538-5899 

 

 

 

 

Fax:   +81-584-27-7505

Email:  [email protected]   

 

 

Email:  [email protected]

 

 

 

 

 

 

 

 

Web:   www.minoura.jp

MADE IN JAPAN

If  you need help, please contact the shop first where you originally purchased this product or call the distributors 

in your country. The distributors list can be found on our web site.

Содержание FG540 HYBRID ROLLER










Отзывы: