3
3-8
Setting up the Pi5500 from a Windows Computer
Network Setup
Network Setup configures the Pi5500 to receive print jobs over the networks that are
used at your site. If the Pi5500 is configured to enable more than one protocol, it
automatically switches to the correct protocol when it receives a print job. When the
parallel port and one or two network ports are enabled, print jobs can be received over
all of ports at the same time.
You can modify these Network Setup options:
• Ports—Ethernet, Token Ring, or parallel port
• Protocols—TCP/IP, AppleTalk, and IPX/SPX
• Print Services—NetWare printing (PServer), Windows print sharing (SMB),
LPD printing (TCP/IP), and HTTP support (WWW), IPP printing, and
Port 9100 printing.
N
OTE
:
To set up Port 9100 printing, use Setup from the Pi5500 Control Panel.
