Minolta DIMAGE 7HI - SOFTWARE, Инструкция по эксплуатации

Страница: 27 / 156

3
4
27
BASIC RECORDING OPERATION
Place the subject within the focus frame.
• For off-center subjects use the focus-lock function (p. 28).
• Make sure the subject is within the focus range of the lens: 0.5m
(1.6ft) – ∞ . For subjects closer than 0.5m, use the macro function
(p. 47).
Press the shutter-release button all the way down (4) to take the
picture.
The access lamp will glow indicating the image data is being
written to the memory card. Never remove a card while data is
being transferred.
Turn the mode dial to the recording position (1). Use the zoom-
ing ring to frame the subject (2). The effect of the zoom is imme-
diately displayed in the viewfinder (EVF) and LCD monitor.
Press the shutter-release button partway down (3) to lock the
focus and exposure.
• The focus signals (p. 29) on the monitors will confirm that the
image is in focus. If the focus signal is red, the camera was unable
to focus on the subject. Repeat the previous steps until the signal
is white.
• When the focus is set, an AF sensor will briefly appear in the live
image to indicate the point of focus.
• The shutter speed and aperture value will change from white to
black indicating the exposure is locked.
• The live image may freeze for an instant as the AF system
determines focus.
2
1