Minolta DI1610F Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 260

Minolta DI1610F Скачать руководство пользователя страница 11

1

1.1 We Want You to Be a Satisfied Customer

1-2

Di1610f

Int

ro

duc

tio

n

Chap

ter

1

1.1

We Want You to Be a Satisfied Customer

Thank you for choosing the Di1610f.

This User Manual describes the functions, operating procedures, precautions, and
basic troubleshooting for the Di1610f.

Before using this machine, be sure to read the User Manual thoroughly in order to
ensure that you use the machine efficiently. After you have gone through the
manual, store it in the holder and keep it handy at all times.

Note that some of the illustrations of the machine used in the User Manual may be
different from what you actually see on your machine.

CE Marking (Declaration of Conformity)

This product complies with the following EU directives:
89/336/EEC, 73/23/EEC and 93/68/EEC directives.
This declaration is valid for the region of the European Union.

This device must be used with shielded interface cables. The use of non-shielded
cable is likely to result in interference with radio communications and is prohibited
under EU directives.

For U.S.A. Users
FCC Part 15-Radio Frequency Devices

NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.

Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.

WARNING: The design and production of this unit conform to FCC regulations, and
any changes or modifications must be registered with the FCC and are subject to
FCC control. Any changes made by the purchaser or user without first contacting
the manufacturer will be subject to penalty under FCC regulations.

This device must be used with shielded interface cables. The use of non-shielded
cable is likely to result in interference with radio communications and is prohibited
under FCC rules.

«
...
9
10
11
12
13
...
»

Содержание DI1610F





































































































































































































































































Отзывы:

Нет отзывов