MINOLTA-QMS PagePro 9100, Руководство пользователя

Страница: 34 / 192

Media Storage and Handling 28
„
Multicolored
„
Preprinted or multicolored (may result in printer jamming)
Use postcards that are
„
Japanese Post Office standard postcards (3.9 x 5.8:” [100 x 148 mm])
recommended for laser printers
What should I watch out for when loading thick stock?
Test all thick stock to ensure acceptable performance and to ensure that the
image does not shift.
Do not use thick stock that is
„
Mixed with any other media in the media trays (as this will cause printer
jamming)
What should I watch out for when loading transparencies?
Attention
Using unsupported transparency media such as coated color
transparencies will result in damaging the printer and in voiding your
warranty.
Remove transparency media as soon as possible from the output tray to
avoid static buildup.
If you touch the face of transparencies with your bare hands, print quality may
be affected. Do not handle transparency media too much.
Do not fan large quantities of transparency media before loading it.
You can print continuously with transparencies. However, this could affect the
media feed, depending on the media quality, static buildup, and printing envi-
ronment. For the multipurpose tray, if you have problems loading a large
number of transparencies at a time, try loading only 1–10 sheets.
Attention
Use only the MINOLTA-QMS-approved transparencies. Check
www.minolta-qms.com for currently approved media. To order
approved media, go to www.q-shop.com.
Do not use transparencies that
„
Are coated, such as transparencies designed for color printers or copiers
„
Have static electricity that will cause them to stick together
Use transparencies that are
„
Monochrome, uncoated transparencies (also known as OHP film)