MINOLTA-QMS PagePro 9100 Скачать руководство пользователя страница 141

Страница: 141 / 192

Deinstalling Accessories

135

How do I care for media?

If media has been removed from its wrapper, place it in its original packaging
and store in a cool, dark place.

When storing media, avoid

„

Moisture, excess humidity

Keep media between 30% to 65% relative humidity. Toner does not
adhere well to moist or wet paper

On the other hand, media that has been stored for a long time without
staying in its packaging may dry up too much and also cause jamming.

„

Direct sunlight

„

Excess heat (up to 86° F/30° C)

„

Dust

„

Leaning against other objects or placed in an upright position

Store the media in a dust-free area protected from humidity.

Deinstalling Accessories

Attention

Before transporting the printer, remove the toner cartridge, put the
cartridge in its original package or in a plastic bag, and then
transport it without subjecting it to strong impacts.

How do I remove a duplexer?

If both the optional duplexer and the 4-bin mailbox are to be removed,
remove the duplexer first.

Turn off the printer, and unplug the
power supply cord and interface
cable.

The illustration shows the printer with-
out a 4-bin mailbox. Follow the same
instructions if a 4-bin mailbox is
installed.

Содержание PagePro 9100

































































































































































































Результаты поиска

Содержание PagePro 9100

Отзывы:

Похожие инструкции для PagePro 9100

Бренды по названию

Популярные бренды

MINOLTA-QMS PagePro 9100, Руководство пользователя

Результаты поиска

Содержание PagePro 9100

Отзывы:

Похожие инструкции для PagePro 9100

Бренды по названию

Популярные бренды