MINOLTA-QMS PagePro 9100, Руководство по установке

Страница: 73 / 80

Installing Printer Drivers and Utilities, Macintosh
65
You can connect to your printer by
„
An Ethernet cable.
„
A crossover Ethernet cable.
„
A USB cable.
Macintosh—EtherTalk Interface Configuration
This section briefly describes the configuration procedure for the printer
interface. You can make these configuration changes through any of the
following means:
„
Printer control panel
„
Print Utility for Macintosh
„
Remote Console
„
CrownView
When your printer boots up, it finds a default zone. If your network has more
than one zone, use the Administration/Communications/Optional NIC/
CrownNet/EtherTalk/Zone Name/Zone Part 1 and Zone Part 2 menus to enter
the name of the zone to which the printer is attached if you want it to appear
in a zone different than the one it shows in.
5 "
The two Zone Part x menus allow you to identify 1 zone with a name
up to 32 characters long. (Up to 16 characters can be entered in each
of the two menus). You cannot use these two menus to identify two
zones. Trailing spaces are not considered part of the zone name. All
standard printable ASCII characters are valid except the @ and '
symbols. The names are case sensitive.
Macintosh—PPDs
MINOLTA-QMS develops a PostScript Printer Description (PPD) file for every
printer it produces for the Macintosh. The Macintosh Operating System
includes a PostScript printer driver (LaserWriter) that uses this PPD to
provide support for features such as input bins, and media sizes.