MINOLTA-QMS MAGICOLOR 6110 Скачать руководство пользователя страница 117

Страница: 117 / 216

BuzzBox

115

Attach one end of the parallel cable on the interface box to the printer’s
parallel port.

The BuzzBox’s ribbon cable is designed to be directly attached to
the printer’s parallel port, not to an adapter or an additional cable.

Use the RJ-11 cable to connect BuzzBox to the interface box.

Choose a good location on the printer to mount the interface box. Make
sure that the unit does not

interfere with paper exiting the printer.

cover any vents, doors, connectors, or labels.

cause the BuzzBox ribbon cable to stretch or twist.

Use the Velcro

attachment provided to mount the BuzzBox where the

printer operator can see and/or hear it.

A 14-foot (4.2 m) cable is provided, but you can use up to a 500-foot cable
(RJ-11 4-pin or 6-pin).

Connect the interface box to an electrical outlet.

A 110/220-volt adapter is provided in the US, and a universal power sup-
ply is provided outside the US.

If you unplugged a parallel cable from the printer in step 1, attach the
cable to the parallel port on the interface box.

B uzzBox

A dapter

R ibbon cable

Interface box

Содержание MAGICOLOR 6110

























































































































































































































Результаты поиска

Содержание MAGICOLOR 6110

Отзывы:

Бренды по названию

Популярные бренды

MINOLTA-QMS MAGICOLOR 6110, Руководство пользователя

Результаты поиска

Содержание MAGICOLOR 6110

Отзывы:

Бренды по названию

Популярные бренды