Minimotors SpeedWay V, Руководство пользователя

Страница: 5 / 11

08
Speedway5 User Manual Speedway5 User Manual
09
Step3
Headligt button
Horn button
Turn signal
(A beep is generated
during operation.)
1. Fold the handle T-bar
QR lever
(height adjust
fixing lever)
Pull out the folding lock (S button
lever) and fold the handle post
(steering tube).
Fold handle T bar and
release QR lever and
push downward.
2. Folding and fixing the handle post (steering tube)
QR
locking
status
1) Productunfolding
1. Raise the handle post(Steering tube) 2. Expand the handle T-bar after height adjustment
QR lever(height adjust fixing lever)
Release the QR lever, adjust the height of
the handle bar, fix the QR lever, and unfold
the handle T bar.
Tip
Pull out the folding
retainer with the S
engraved.
Driving mode Motor system
Pressed
(Low speed)
Not pressed
(High speed)
ECO
TURBO
Not pressed
(Rear wheel
driving)
Pressed
(Front&rear two-
wheel driving)
SINGLE
DUAL
Step4
ECO
TURBO
SINGLE
DUAL
How to use the product
2) How to start
Things to check before power on
Before turning the product on, turn on
the power with the LED lamp button
turned off.
After tilting the kickstand, find a stable
position on the footrest and then hold the
handle grip comfortably. Be careful not to
raise your foot on the rear fender.
Step3. Stance for driving
Acceleration can be performed by using the
throttle of the instrument panel while driving,
and the deceleration or stop can be performed
by holding the brakes on the handle.
Step4. Acceleration and deceleration
Rear fender
Side stand
Brake
If the headlight button is pressed before the product
is turned on, the instrument panel will not turn on.
In this state, it is designed not to start. (Built-in short-
time theft prevention function)
* The power of the instrument panel will turn off
automatically after a few minutes of inactivity.
At this time, the LED lamp is also turned off, so
turn it off with the LED lamp button when you
turn it on again, and turn off the main power
switch after use.
Step1. Turning on the main switch
Press the POWER button on the instrument
panel for 2 seconds to turn on the instrument
panel. You can set the start mode, cruise
mode, electronic brake, and ABS function..
Step2. Turning on the instrument panel
Make sure that the folding lock is firmly locked (S) before driving and push the handle
until it clicks. is fastened well. And check the position of the fixing slide, the QR lever locking
status and the folding part fixing status.
Throttle malfunction caution Regardless of whether the throttle is operated or not, the motor sensor may
continue to operate, causing malfunctions such as sudden acceleration. In this case, holding the brake lever to
cancel the operation. This phenomenon may be caused by corrosion of the throttling, immersion of the throttle,
disconnection of the magnet, broken off levers, and breakage of the spring. Do not bounce the throttle lever strongly.
Caution
4) Product folding
Rear fender
Brake
Index finger
throttle
3) How to stop
Step1 Step2
Be sure to use the rear brake first for
decelerating when stopping while driving.
For safe stop, it is necessary to practice slow
down after deceleration with rear brake.
Always use the front and rear brake
levers together to stop smoothly and
safely after decelerating with the rear
brake.
Rear brake use Front brake use
Multi switch
Set the use and strength of the electronic
brake among the detailed functions of the
instrument panel before driving. When the
brake lever works, the electronic brake works
together to increase the braking force.
Deceleration and braking
using electric brake
For safe braking, check whether the brake lever and disc caliper connection (wire damage,
external breakage, etc.) are damaged before and after driving, and check brake wear and
looseness of brake inner core(Inner wire). In the case of hydraulic brakes, it is also necessary to
check the oil leakage or deficiency and always check that the braking force is sufficient.
Check for safe braking
Tip