14. FAILURE TO CORRECTLY INSTALL AND USE YOUR MINIMIZER FLOOR MATS ACCORDING TO THE
INSTRUCTIONS ABOVE COULD PREVENT PROPER FUNCTIONING OF THE VEHICLE’S PEDALS, POTENTIALLY
RESULTING IN LOSS OF CONTROL OF THE VEHICLE AND SERIOUS INJURY OR DEATH.
WARRANTY
Minimizer Floor Mats are backed by a Lifetime Manufacturer’s Warranty and are guaran-
teed against laws due to faulty materials and/or unintended production variations. This
warranty extends only to the original purchaser and excludes damage caused by abnor-
mal use or conditions, including but not limited to extreme abrasive conditions and/or
excessive exposure to chemicals such as bleach, gasoline and other fuels.
Safety Instructions for Installation
• Use only with the speciied vehicle make, model and year.
• Do not install on top of other loor mats.
• Install each loor mat with the Minimizer logo facing up.
• Use each loor mat only in its proper location in the vehicle.
• Install and use a retention hook for the driver side loor mat.
• Make sure that the loor mats it properly in your vehicle loor space.
• Do not place additional loor mats on top of the Minimizer loor mats.
• Carefully follow each of the Installation Instructions for Minimizer Floor Mats on the following pages.
Safety Instructions for Vehicle Operation
• Before starting or operating the vehicle, verify that the Minimizer loor mats are installed
correctly, that the driver side mat is secured by a retention hook, and that the driver side
mat does not interfere with the accelerator, brake, or clutch pedal.
• Make sure there are no loose objects in the vehicle that could possibly interfere with the
operation of the accelerator, brake, or clutch pedal.
• If your Minimizer loor mat becomes loose, stop the vehicle at the next safe location.
Re-install the loor mat properly and securely. If that is not possible, remove the loor mat
and place it in a location where it will not interfere with safe operation of the vehicle.
• Inform all drivers of these warnings before allowing them to operate a vehicle equipped with
Minimizer loor mats.
Minimizer loor mats are speciically designed for certain vehicles and may be used safely only
with those vehicles. VERIFY THAT THE MAKE, MODEL, AND YEAR OF THE VEHICLE IN WHICH YOU ARE
INSTALLING THE FLOOR MATS ARE IDENTIFIED BELOW AS BEING COMPATIBLE WITH THE MINIMIZER
FLOOR MATS YOU HAVE SELECTED.
If you have questions about these instructions or proper installation of your Minimizer loor mats,
please contact Minimizer at (800) 248-3855.
IMPORTANT SAFETY INFORMATION
READ BEFORE INSTALLING OR USING MINIMIZER FLOOR MATS
Manufactured by Spray Control Systems, Inc. (SCSI)
500 Minimizer Way, Blooming Prairie, MN 55917
800.248.3855 • Fax: 888.583.7540
www.minimizer.com
PETERBILT - FKPB4B
• 378 - 2006 to 2007*
• 379 - 2006 to 2007*
• 385 - 2006 to 2007*
• 357 - 2006 to 2007*
•
All 2006-2017: 365,367,384,386,388,389 trucks equipped with an
Eaton Ultrashift Control Tower.
Headquartered in Blooming Prairie, Minnesota, USA, Minimizer manufactures poly
truck fenders, poly toolboxes, customized mud laps, loor mats, and bracket kits.
Family owned and operated for nearly 3 generations, Minimizer parent company
Spray Control Systems, Inc., was founded in 1983. Minimizer aims to provide
products tough enough to please tough people in a tough industry. All Minimizer
products are made in the USA.
* See next page for detailed model/it speciications
December 2017
MINIMIZER PRODUCTS
• TESTED AND TORTURED
TM
•
DAILY BY TRUCKERS FOR TRUCKERS
Item # 103535