10
ENGLISH
5.2.3. SOUND ACTIVATION
dreamcube has a sound activation function. If your
baby cries, it will switch on automatically and soothe
the baby with relaxing lights and sounds. To turn on
this function, press the sound activation on button
(5).
If the device is already on, you will hear a double
beep. If the device is switched off, you will hear a
single beep. Both indicate that the sound activation
mode has been turned on.
When this mode is on and the projector detects
noise louder than its pre-established threshold, the
projection and the sound will turn on for 5 minutes
to help the baby drift off again. Then the device will
switch off again and will come on again if it detects a
noise again above its threshold. To switch the device
off before 5 minutes, press the sound activation
mode off button (6).
The maximum volume level that the sound will reach
in this mode will depend on the last level saved.
For example, if the last volume level saved was
level 4, then the next time that the device activates
upon detection of a sound, it will start at level 1 and
gradually increase the volume to level 4.
Note 1:
When you use this feature, both the light and
sound will come on, and you won’t be able to switch
them on and off independently.
6. MAINTENANCE AND CLEANING
To clean the projector, simply wipe with a damp
cloth. Do not get it wet, rinse it or use spray cleaners
or any other cleaning methods.
Do not immerse the projector in water.
7. TECHNICAL SPECIFICATIONS
• Voltage: 220-240V AC. - 3 x AAA (1.5V)
• Frequency: 50/60Hz
• Consumption: 2W
8. PRODUCT DISPOSAL INFORMATION
This product must be disposed of
responsibly. Do not dispose of products
with your general household waste if they
are marked with the crossed out wheelie
bin symbol. At the end of their useful life,
these products must be taken to your
local household waste recycling centre.
You can also get in contact with the place
where you purchased the product in order
to take it back. Dispose of the batteries
separately at a battery recycling point.
