miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
21
5.5
R
OUTING
The routing matrix is used to direct input channels (along the left) to output channels (along the top). To turn on
routing for a cross-point, click on that cross-
point. The display will change from “Off” to show the mix level (0 dB
by default).
Below is the default routing matrix. The input and output channel names displayed on the matrix match those
set on the input and output control strips:
Changing the channel labels on the control strips changes them on the routing matrix, as an aid to ensuring
correct configuration. This is the typical routing that will be used with the SPK-4P:
At each cross-point, the gain of the signal being mixed can be adjusted to a value between -72 and +12 dB. To
adjust the gain, right-click on the cross-point and a gain control will appear. Adjust the gain with the slider, or by
typing in the value directly, then click
close
:
