miniDSP PWR-ICE125, Руководство пользователя

Страница: 36 / 54

mi niDSP Ltd, Hong Kong / www.minidsp.com / Features and speci fi cations subject to change wi thout pri or noti ce
36
5 S
IGNAL
P
ROCESSING
F
UNCTIONS
5.1 P
ARAMETRIC
EQ
There is a parametric EQ (PEQ) block on each input channel and on each output channel. The input channel
blocks each provide twelve parametric filters, while the output channel blocks each provide six parametric
filters. A parametric filter can be set to a peaking boost or cut filter, high shelf filter, or low shelf filter.
The top section of the control panel shows the overall response curve of all six PEQ filters. Hovering the mouse
over the curve brings up an overlay showing the frequency and the gain at that frequency.
The example above shows (by way of example, this is not a typical setting) a response curve with four filters:

A low-shelf filter with 6 dB boost, centered at 50 Hz

A peaking filter with 6 dB cut (gain set to a negative value), centered at 300 Hz

A peaking filter with 6 dB boost, centered at 2 kHz

A high-shelf filter with 6 dB cut (gain set to a negative value), centered at 10 kHz