mi niDSP Ltd, Hong Kong /
/ Features and speci fi cations subject to change wi thout pri or noti ce
28
4.8
A
MPLIFIER MODE
The Amplifier mode sets how the two output channels are processed.
2-ch
The two amplifier channels operate independently. In the input mode L, R, and Mixed L&R, the
same signal is fed to both channels. In Stereo input mode, each amplifier channel receives its
respective input channel.
BTL
The two amplifier channels are configured into BTL (bridge-tied load) mode. In this mode, the
amplifier channels are driven out of phase, enabling higher power output into a single speaker
or speaker driver.
The output channel strips at the right of the plugin user interface change depending on the selected amplifier
mode:
The physical connections to the speaker output terminals must be consistent with the selected
amplifier mode. See page 21.
